Breeze Hi-Torque Clamps

Guaranteed to withstand more than 3 times the SAE standard torque requirements for Type F worm-drive clamps

This is the original and still the highest torque rated worm-drive clamp available in the world! Use it where conventional clamps are inadequate or in applications where double and triple clamping is now needed.

Made in a range of stock sizes for convenient adjustment around standard diameters (typically in OEM or other production assembly work).

Identical with HTM series except that the single-piece band is extended underneath the adjustment slots to protect silicone or other soft-surface materials.

This special series of Hi-Torque clamps offers a greatly expanded working diameter range by adding extra perforations to the band: eg. HP 4 covers working diameters normally covered by HTM-500, HTM-550 and HTM-600. Only 4 sizes covers working diameters from 1-1/4" (32 mm) to 9-1/8" (232 mm).

STOCK NUMBERS		EFFECTIVE DIAMETER RANGE
HTM --- Standard	HTM --- L Liner
		Min.		Max.
		in. mm.		in. mm.
HTM-175	HTM-175 L	1	25	1-3/4	44
HTM-200	HTM-200 L	1-1/4	32	2-1/8	54
HTM-250	HTM-250 L	1-3/4	44	2-5/8	67
HTM-300	HTM-300 L	2-1/4	57	3-1/8	79
HTM-350	HTM-350 L	2-3/4	70	3-5/8	92
HTM-400	HTM-400 L	3-1/4	83	4-1/8	105
HTM-450	HTM-450 L	3-3/4	95	4-5/8	118
HTM-500	HTM-500 L	4-1/4	108	5-1/8	130
HTM-550	HTM-550 L	4-3/4	121	5-5/8	143
HTM-600	HTM-600 L	5-1/4	133	6-1/8	156
HTM-650	HTM-650 L	5-3/4	146	6-5/8	168
HTM-700	HTM-700 L	6-1/4	159	7-1/8	181
HTM-750	HTM-750 L	6-3/4	172	7-5/8	194
HTM-800	HTM-800 L	7-1/4	184	8-1/8	206
HTM-850	HTM-850 L	7-3/4	197	8-5/8	219
HTM-900	HTM-900 L	8-1/4	210	9-1/8	232

STOCK NUMBERS	EFFECTIVE DIAMETER RANGE
Extended Diameter
	Min.		Max.
	in. mm.		in. mm.
HP 2	1-1/4	32	2-5/8	67
HP 3	2-1/8	54	4-1/8	105
HP 4	4	102	6-1/8	156
HP 5	6-1/8	156	9-1/8	232

Breeze Industrial Products Corporation
3582 Tunnelton Road
Saltsburg, PA 15681 U.S.A.
Tel: (724) 639-3571
Fax: (724) 639-3020
E-mail: breeze@breezeclamps.com