Breeze Power-Seal Clamps

	POWER-SEAL CLAMPS - General Purpose Industrial Clamps
	General purpose automotive and industrial clamps. High strength construction. Exceeds SAE requirements. Use for all standard clamp applications.
	A TURN FOR THE BETTER The sealing pressure oriented design on Breeze Power-Seal clamps enables it to outperform other general purpose industrial clamps. Why? Because the band width to torque to sealing pressure properties of Breeze Power-Seal clamps are designed to give higher sealing pressure with lower applied torque. This is especially important in the lower, typical torque ranges achieved when a clamp is installed by hand with a screwdriver or nutdriver.

62000 Series	63000 Series	64000 Series
Use for standard clamp applications. Stainless steel band and housing with a carbon steel, carbon plated, slotted hex head screw.	Highly corrosion resistant for marine and underground use. All 300 series stainless steel band, screw, saddle and housing	For use in outdoor, fresh water, and mildly corrosive applications. All stainless steel band, screw, saddle and housing.

STOCK NUMBERS			EFFECTIVE DIAMETER RANGE
Plated Hex Screw	300 Series Stainless Hex Screw	Stainless Steel Hex Screw
			Min.		Max.
			in. mm.		in. mm.
62006	63006	64006	7/16	11	25/32	20
62008	63008	64008	1/2	13	29/32	23
62010	63010	64010	9/16	14	1-1/16	27
62012	63012	64012	11/16	17	1-1/4	32
62016	63016	64016	13/16	21	1-1/2	38
62020	63020	64020	13/16	21	1-3/4	44
62024	63024	64024	1-1/16	27	2	51
62028	63028	64028	1-5/16	33	2-1/4	57
62032	63032	64032	1-9/16	40	2-1/2	64
62036	63036	64036	1-13/16	46	2-3/4	70
62040	63040	64040	2-1/16	52	3	76
62044	63044	64044	2-5/16	59	3-1/4	83
62048	63048	64048	2-9/16	65	3-1/2	89
62052	63052	64052	2-13/16	71	3-3/4	95
62056	63056	64056	3-1/16	78	4	102
62060	63060	64060	3-5/16	84	4-1/4	108
62064	63064	64064	3-9/16	91	4-1/2	114
62072	63072	64072	1-7/8	48	5	127
62080	63080	64080	2-1/2	64	5-1/2	140
62088	63088	64088	3-1/8	79	6	152
62096	63096	64096	3-5/8	92	6-1/2	165
62104	63104	64104	4-1/8	105	7	178
62128	63128	64128	5-5/8	143	8-1/2	216
62152	63152	64152	7-1/8	181	10	254
62188	63188	64188	9-3/8	238	12-1/4	311
* Larger & custom sizes available upon request.

Breeze Industrial Products Corporation
3582 Tunnelton Road
Saltsburg, PA 15681 U.S.A.
Tel: (724) 639-3571
Fax: (724) 639-3020
E-mail: breeze@breezeclamps.com